# Does Zymkey 4i work with raspberry pi compute module?

**URL:** <https://community.zymbit.com/t/does-zymkey-4i-work-with-raspberry-pi-compute-module/549>\
**Category:** ZYMKEY4\
**Created:** [May 31, 2019, 11:56am UTC](https://community.zymbit.com/t/does-zymkey-4i-work-with-raspberry-pi-compute-module/549 "2019-05-31T11:56:26Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![sreenath](https://avatars.discourse-cdn.com/v4/letter/s/ecc23a/32.png) [@sreenath](https://community.zymbit.com/u/sreenath)\
**Post date:** [May 31, 2019, 11:56am UTC](https://community.zymbit.com/t/does-zymkey-4i-work-with-raspberry-pi-compute-module/549/1 "2019-05-31T11:56:26Z")

</div>

Hi,

How can i integrate zimbit module with raspberry pi compute modules

---

<div class="post-metadata">

**Author:** ![Phil\_S\_Zymbit\_1](https://avatars.discourse-cdn.com/v4/letter/p/45deac/32.png) [@Phil\_S\_Zymbit\_1](https://community.zymbit.com/u/Phil_S_Zymbit_1)\
**Post date:** [May 31, 2019, 4:40pm UTC](https://community.zymbit.com/t/does-zymkey-4i-work-with-raspberry-pi-compute-module/549/2 "2019-05-31T16:40:23Z")

</div>

@sreenath

Yes zymkey 4i will work with raspberry pi compute module. You just need access to the I2C and GPIO4 signals. Are you using the compute module dev kit, or are you desiging something custom with the compute module ?

---

<div class="post-metadata">

**Author:** ![sreenath](https://avatars.discourse-cdn.com/v4/letter/s/ecc23a/32.png) [@sreenath](https://community.zymbit.com/u/sreenath)\
**Post date:** [June 3, 2019, 6:24am UTC](https://community.zymbit.com/t/does-zymkey-4i-work-with-raspberry-pi-compute-module/549/3 "2019-06-03T06:24:19Z")

</div>

we are using custom compute module

---

<div class="post-metadata">

**Author:** ![Phil\_S\_Zymbit\_1](https://avatars.discourse-cdn.com/v4/letter/p/45deac/32.png) [@Phil\_S\_Zymbit\_1](https://community.zymbit.com/u/Phil_S_Zymbit_1)\
**Post date:** [June 3, 2019, 6:41pm UTC](https://community.zymbit.com/t/does-zymkey-4i-work-with-raspberry-pi-compute-module/549/4 "2019-06-03T18:41:43Z")

</div>

If your custom carrier board has access to the GPIO and I2C, and are using Raspbian Stretch, then you should be able to make Zymkey work with Compute Module.