# SEEED ODYSSEY UBUNTU Focal 20.4

**URL:** <https://community.zymbit.com/t/seeed-odyssey-ubuntu-focal-20-4/950>\
**Category:** Ubuntu\
**Created:** [September 11, 2020, 2:39am UTC](https://community.zymbit.com/t/seeed-odyssey-ubuntu-focal-20-4/950 "2020-09-11T02:39:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cameron](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@Cameron](https://community.zymbit.com/u/Cameron)\
**Post date:** [September 11, 2020, 2:39am UTC](https://community.zymbit.com/t/seeed-odyssey-ubuntu-focal-20-4/950/1 "2020-09-11T02:39:54Z")

</div>

Hello,  
I am trying to get the zymkey4i to work with a seeed studio [ODYSSEY-X86J4105](https://wiki.seeedstudio.com/ODYSSEY-X86J4105/) . It has a pin header that matches the RPi 40 pin. When trying to install it using the following command:

`curl -G https://s3.amazonaws.com/zk-sw-repo/install_zk_sw.sh | sudo bash`

I get the following

> …  
> Successfully built progress  
> Installing collected packages: progress  
> Successfully installed progress-1.5  
> Collecting python-gnupg  
> Downloading python\_gnupg-0.4.6-py2.py3-none-any.whl (17 kB)  
> Installing collected packages: python-gnupg  
> Successfully installed python-gnupg-0.4.6  
> done.  
> Importing Zymbit Packages gpg key… done.  
> Installing /etc/apt/sources.list.d/zymbit.list…done…Updating now.  
> Hit:1 [Index of /ubuntu](http://us.archive.ubuntu.com/ubuntu) focal InRelease  
> Hit:2 [Index of /ubuntu](http://us.archive.ubuntu.com/ubuntu) focal-updates InRelease  
> Hit:3 [Index of /ubuntu](http://security.ubuntu.com/ubuntu) focal-security InRelease  
> Hit:4 [Index of /ubuntu](http://us.archive.ubuntu.com/ubuntu) focal-backports InRelease  
> Err:5 [https://zk-sw-repo.s3.amazonaws.com/apt-repo-focal-x86\_64](https://zk-sw-repo.s3.amazonaws.com/apt-repo-focal-x86_64) focal InRelease  
> 403 Forbidden [IP: 52.216.138.115 443]  
> Reading package lists… Done  
> E: Failed to fetch [https://zk-sw-repo.s3.amazonaws.com/apt-repo-focal-x86\_64/dists/focal/InRelease](https://zk-sw-repo.s3.amazonaws.com/apt-repo-focal-x86_64/dists/focal/InRelease) 403 Forbidden [IP: 52.216.138.115 443]  
> E: The repository ‘[https://zk-sw-repo.s3.amazonaws.com/apt-repo-focal-x86\_64](https://zk-sw-repo.s3.amazonaws.com/apt-repo-focal-x86_64) focal InRelease’ is not signed.  
> N: Updating from such a repository can’t be done securely, and is therefore disabled by default.  
> N: See apt-secure(8) manpage for repository creation and user configuration details.

Any help would be greatly appreciated. Many thanks.

---

<div class="post-metadata">

**Author:** ![Bob\_of\_Zymbit](https://avatars.discourse-cdn.com/v4/letter/b/82dd89/32.png) [@Bob\_of\_Zymbit](https://community.zymbit.com/u/Bob_of_Zymbit)\
**Post date:** [September 11, 2020, 4:16am UTC](https://community.zymbit.com/t/seeed-odyssey-ubuntu-focal-20-4/950/2 "2020-09-11T04:16:29Z")

</div>

Hi Cameron,

We don’t support x86. We only support ARM.

Regards,

Bob

---

<div class="post-metadata">

**Author:** ![Cameron](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@Cameron](https://community.zymbit.com/u/Cameron)\
**Post date:** [September 11, 2020, 4:20am UTC](https://community.zymbit.com/t/seeed-odyssey-ubuntu-focal-20-4/950/3 "2020-09-11T04:20:17Z")

</div>

Ah, well I guess that would be the problem. That is too bad. I use the zymkey for my Rpi3’s and 4’s. It is a great solution. Was hoping to also use it for the Odyssey. Thanks anyways.