Pi Zero Not binding

Hi, I am using a Pi Zero v1.1 with 32 Bit Pi OS lite. I am having an issue where the the Zymkey4 appears to not be binding with the Pi and the LED’s still blink 5 times every second. I have enabled I2C and set the CPU scaling to Performance.
Using the Systemctl status zkifc shows the zkifc service is loaded and active.
Any help would be great.

@Zym_User1234 If you haven’t yet, please review the Troubleshooting section here first:

If you still need assistance, please post your /boot/config.txt and we can verify it looks correct. Lastly, do you have more than one Zymkey or Pi Zero to cross-check hardware?